FD722 board
This board is used for input/output and processing of digital video signals in SD/HD/3G/ SDI and ASI formats.
The FD722 board is the hardware for Forward T and Forward TS products. It can also be used as part of Forward Goalkeeper, Forward Referee, Forward Ingest, Focus virtual studios. There is a Fill + Key mode for external mixing.
Main features of the FD722 board:
- PCI-Express x1 bus
- Supports SD/HD/3G/, ASI signals
- Supports mixed modes, for example: SD-SDI + HD-SDI or SDI + ASI
- Low profile
The FD722 Board Specification
Bus |
PCI Express x1 (2.0) |
Inputs and outputs |
|
Signal formats |
- SD-SDI: SMPTE 259M
- HD-SDI: SMPTE 292M, SMPTE 274M, SMPTE 296M
- 3G-SDI: SMPTE ST 424, SMPTE ST 425-1
- ASI (EN50083-9) Bit rate 0..213 Mbps
|
Internal video data processing |
4:2:2 8, 10 bit |
Supported video |
- 480i 59.94
- 576i 50
- 720p 23.98/24/25/29.97/30/50/59.94/60
- 1080i 50/59.94/60
- 1080p: 23.98/24/25/29.97/30/50/59.94/60
|
Modes |
- Up to 2 channels in SD/HD-SDI or ASI modes
- 1 channels in 3G-SDI mode
- Mixed SD-SDI + HD-SDI modes
- Mixed ASI + SDI modes
|
Supported OS |
List of supported OS |
Audio |
24 bit SDI Embedded, 8 stereo audio channels for 1 video input/output
- SD-SDI: SMPTE 272M-A
- 3G/HD-SDI: SMPTE 299M
Synchronization audio to video, configurable audio delay (independently for each input mono channel). |
Synchronization |
- From external analog sync source (Black Burst, Tri-level sync)
- From the first two inputs of the board
- From NTP network time servers
- Software synchronization from another boards of the same type in the same PC
|
DirectShow Capture filters |
Are part of the driver package |
Power usage |
5 wt |
Size |
low-profile, 85x55 mm |
|
|